Phones answered 24/7Sugar Land, TX
Call (833) 490-5225
Guide

When mold work in Sugar Land needs a TX license

How TX regulates mold work: the twenty-five contiguous square foot line, the notification to TDLR, who is exempt, and what to ask before anyone starts.

Illustration for the guide "When mold work in Sugar Land needs a TX license" (Sugar Land, TX)
Short answer

TX licenses mold assessment and mold remediation through the Texas Department of Licensing and Regulation. Remediation of less than twenty-five contiguous square feet needs no license, and at or above that size a contractor must notify the agency at least five calendar days before starting. Some owners of small residential buildings are exempt.

Key takeaways

  • The Texas Department of Licensing and Regulation licenses both mold assessment and mold remediation.
  • A license is not required for mold remediation of less than twenty-five contiguous square feet.
  • At or above twenty-five contiguous square feet, the contractor must notify the agency at least five calendar days before work starts.
  • The rules sit in the Texas Occupations Code, chapter 1958, and in Title 16 of the Texas Administrative Code, chapter 78.
  • Owners and managers of residential buildings with fewer than ten units are exempt from licensing for their own property.
  • No general TX license covering ordinary water extraction and drying was found, so ask what a company holds for each stage.

Which agency writes these rules

The Texas Department of Licensing and Regulation. It licenses mold assessment and mold remediation as separate activities, and the framework sits in the Texas Occupations Code at chapter 1958 and in Title 16 of the Texas Administrative Code at chapter 78.

Knowing the agency is more useful than knowing the chapter numbers, because the agency is where a credential can be checked. Anyone can print a logo on a van door. A license number can be looked up with the body that issued it, and a company that is reluctant to give you its number has told you something.

Ask for the number, the name on the license and the activity it covers, then verify it yourself rather than taking a photograph of a card as proof. That is a five-minute task and it is the single most useful thing a homeowner can do before mold work begins in an occupied house.

The twenty-five contiguous square foot line

Below twenty-five contiguous square feet, mold remediation does not require a license in TX. At or above it, licensing and a notification apply. The word that does the work in that sentence is contiguous: it means one continuous affected area, not a total added up from several rooms.

A patch of mold on a bathroom ceiling and a patch behind a kitchen sink are two areas, each measured on its own. A single growth that runs along the base of a wall and continues behind the cabinets next to it is one area, even though you can only see part of it. That distinction decides which side of the line a job falls on.

It also means the measurement can change once a wall is opened. Something that looked like a small patch can turn out to be the visible end of a much larger area, and at that point the job is a different job with different paperwork. An honest contractor says so and stops rather than carrying on.

The notification before work starts

For work at or above twenty-five contiguous square feet, a contractor must notify the Texas Department of Licensing and Regulation at least five calendar days before beginning. The notification is on the contractor, not on the homeowner, but it is worth knowing it exists.

Those are calendar days, not working days, so a weekend does not pause them. For a homeowner this matters mainly as a timing expectation: licensed mold remediation of any size is not something that starts the same afternoon the problem is found, and a company promising otherwise is either doing something smaller than it has described or skipping a step.

It is a reasonable thing to ask about directly. If a company tells you the area is above the threshold, ask when the notification was filed. If it tells you the area is below, ask how it measured, and ask for that measurement in writing alongside the scope of work.

Who is exempt, and what the exemption does not do

Owners and managers of residential buildings with fewer than ten units are exempt from licensing when the work is on their own property. The exemption covers the licensing requirement; it does not make the work easier, safer or any less likely to be looked at by an insurer.

So an owner of a small rental building can address mold on that building without holding a license. Whether that is wise is a separate question from whether it is permitted. The containment, the removal and the drying still have to be done properly, and the materials still have to come out dry on a meter at the end.

There is also the paperwork side. An insurer or a future buyer will ask what was done and by whom, and an owner who did the work themselves has no third-party record of it. Keeping photographs, readings and receipts is the substitute, and it needs to be done at the time rather than reconstructed later.

What is not licensed: the drying work itself

No general TX license specific to water extraction and structural drying was found. That is not a claim that none exists anywhere in the rulebook, only that none was located, which is why the sensible approach is to ask a company directly what it holds.

The practical effect is that the quality bar for drying is set by the contract rather than by a state card. So the contract is where to put your attention: the written scope, the readings that define the dry target, the list of what will be removed, and what happens if the scope has to grow once a wall is open.

Ask for registrations and insurance details, ask who performs each stage, and ask for all of it in writing before equipment is placed. A company that works this way will not mind the questions. What decides the size of a water damage bill sets out what that written scope should contain.

How drying work and licensed mold work fit together

Fast, complete drying is what keeps a water loss from becoming a mold job at all. Mold needs moisture, and material dried back to target within a short window generally does not grow it. Once growth is established, the size of the affected area decides what rules apply.

That is why a crew reads materials rather than feeling them. A wall that is dry on the face and wet in the cavity is the exact condition that produces a mold call three weeks later, and in a climate this humid the cavity does not dry on its own once the finish is closed back up.

If growth is already visible when a crew arrives, the sequence changes: the area is measured, the finding is documented, and the licensed questions come before anyone starts pulling material. Mold remediation and dehumidification and humidity control describe the two halves of that work.

What to ask before signing anything

Six questions cover most of it: what was measured, how, what the area is, which license applies, who is doing each stage, and what the written scope says will be removed. Any company doing this properly answers all six without hesitating.

Write the answers down as you get them. Not because anyone expects a dispute, but because a written answer given before work starts is the thing that keeps a job honest, and because an insurer reading the file later will want the same six facts in the same order.

If a company answers two of the six and talks around the rest, that is your answer. There is no shortage of companies able to say plainly what they measured and what they hold.

Questions to ask, and what a straight answer sounds like
Ask thisA straight answer sounds like
How big is the affected area?A measurement in contiguous square feet, with how the edge was found
Which license applies to this job?A named activity, a number, and the agency it was issued by
Who performs the assessment?A named licensee, separate from whoever does the removal
What is coming out of my house?A written list of materials and the reading that condemned each
How will I know the area is dry?A target reading, and a final set of readings handed to me
What if the area turns out to be bigger?Work stops, the area is remeasured, the paperwork catches up

Where this leaves a homeowner in Sugar Land

In a decent position, if the questions are asked early. The state licenses the mold stages and publishes the threshold, so a homeowner can check what applies to their own job rather than relying on what a salesperson says about it.

The one thing worth doing before any of this becomes relevant is to deal with water quickly. Nearly every mold call in this part of the Gulf Coast starts as a water call that was left for a few days, and the cheapest version of this entire page is a dry wall cavity.

Phones are answered 24/7 and a crew is dispatched as soon as one is available. If you have found growth rather than water, say so on the call so the right questions get asked first. Call (833) 490-5225 and describe what you can see and how large the area appears to be.

Frequently asked questions

Does a small patch of mold really need no license in Texas?

Remediation of less than twenty-five contiguous square feet does not require one. That is a rule about licensing, not a statement that a small patch is unimportant. Mold grows where there is moisture, so the useful question is where the water is coming from, because removing growth without fixing the source simply schedules its return.

What does contiguous mean when the area is measured?

One continuous affected area rather than a total from around the house. Two separate patches in different rooms are measured separately. One growth that runs along a wall base and continues behind a cabinet counts as a single area, including the part you cannot see until the cabinet comes out.

Who files the five-day notification?

The contractor doing the licensed remediation files it with the Texas Department of Licensing and Regulation. You do not file anything. It is still worth asking when it was submitted, because it sets the earliest date the work can start and tells you whether the company has treated the job as a licensed one.

I own a small rental building. Can I handle it myself?

Owners and managers of residential buildings with fewer than ten units are exempt from licensing for their own property. Being allowed to and being equipped to are different things. If you do it yourself, document everything with photographs and moisture readings, because nobody else will be holding a record of the work.

Is water damage restoration licensed in Texas the same way?

No general state license covering extraction and drying was found. That makes the written contract the thing that protects you: the scope, the target readings, the removal list and the terms for any change. Ask what registrations and insurance a company carries, and check anything you are given with the body that issued it.

Sources

  1. Texas Department of Licensing and Regulation
  2. Texas Administrative Code, Title 16

This guide is general information for Fort Bend County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.

One call and it gets handled.

A crew is dispatched as fast as one is available, and you approve the estimate before any work starts.

Keep reading

More guides

WhatsApp